Thermal liquid flow meters are instruments that measure the mass flow rate of fluids to precision. The most excellent uses are in significant industries. The industries include clean energy, aeration of wastewater, flare gas, fermenting beverages, chilling foods, etc. You can only use the meters in ducts and pipes.
The demand for thermal liquid mass flow meters is on the rise. Its flexibility pushes it. You can use the thermal liquid flow meters in very high flow, as well as shallow flows. There is a reason you get accurate results with this type of liquid flow meter. They are resistant to pressure and heat fluctuations of the fluid.
The Working Principles of Thermal Liquid Mass Flow Meters
These meters use the thermal properties in a fluid to get the flow of the juices. It can only gauge well in pipes and ducts. Many meters operate in normal heat levels. But, some meters will work with fluids at extreme temperatures. Hence, the meters should be gauged and have a higher heat input to the sensor.
When the cross-section area of the flow expands, the heat from the sensor is lost faster. The thermal properties of fluid allow the meter to sense the amount of heat lost. Also, the sensor design affects the amount of heat lost from the sensor.
The sensor gauges the fluid’s heat against the heat input to calculate the fluid flow; the faster the liquid, the quicker the heat loss. These meters’ uses mainly measure gases and steam—the thermal flow meter sales amount to 2% of flow meter sales globally.
If the fluid flow is constant, then the flow measurement is smooth. Also, you should know the liquid elements and their thermal properties. The calculation is easy since the pressure and temperature do not affect the sensor.
The thermal properties of a fluid are derived from the properties of the element within the fluid. That is why it is easier to get the thermal properties of pure liquids. When you are aware of the ingredients in a fluid, you will gauge the meter correctly.
See More: Principles and Advantages of Cooling Flow Meter
How to Use Thermal Flow Meter
Liquid mass flow meters are applied in many industries. They may relate to clean gases, water, oil and glasses, food and industry, and many more. The gases that flow through the meter may be air, nitrogen, hydrogen, argon, helium, etc. From this article, you can tell that this meter is used to measure the flow of mixed fluids. For example, you can measure the flow of biogas. You will get the accurate measurements only when you know the components of the biogas.
Also, You Can Read Explain the Flow Control Valve and Its Suitable Applications
Conclusion
When you use the liquid mass flow meter, you get the direct flow measurement. You do not need to do any calculations. The size in a thermal flow meter is on a molecular level. Thus, it gives precise measurements.
Here are a few more topics that you shouldn’t miss:
Usage and Applications of a Paddle Wheel Liquid Flow Meter
Principles and Advantages of Cooling Flow Meter
Like This Post? Don’t Forget To Share